- EdgeCasters must be on a minimum version of 9.0.x
- The customer has admin access to their LiveEdge® Cloud organization, as set up by a Videon team member
Now with the LiveEdge® Core 9.0 software release, all it takes is one-click to get EdgeCaster enrolled in the Videon LiveEdge® Cloud.
To enroll an EdgeCaster in the LiveEdge® Cloud first navigate to the advanced tab in the web ui and click on the LiveEdge® Cloud button which says “Enroll in LiveEdge® Cloud”
This will prompt the user to confirm enrolling the EdgeCaster in the LiveEdge® Cloud. It can also be disabled here in the future if needed. The button will show text indicating that it is “provisioning” the device.
Button as it shows while the EdgeCaster is provisioning itself for LiveEdge® Cloud
Once the EdgeCaster is provisioned the following options will show "Disable LiveEdge® Cloud Communication" or "Adopt Device into Organization". Click on "Adopt Device into Organization" to get started in LiveEdge® Cloud.
Next, click yes to adopt your EdgeCaster into your Organization’s LiveEdge® Cloud. It will prompt you to confirm the serial number of the device that you are enrolling in LiveEdge® Cloud.
Reboot your EdgeCaster and it is now enrolled and ready to be used in LiveEdge® Cloud! This can be done either from the cloud or from local access on the unit under the advanced tab.
For more information on using LiveEdge® Cloud, please visit this article.