Pre-requisites
- Node/EdgeCasters must be on a minimum version of 9.0.x
- The customer has admin access to their Cloud Control organization, as set up by a Videon team member
Now with the OS 9.0 software release, all it takes is one-click to get Node/EdgeCaster enrolled in the Videon Cloud Control.
To enroll an Node/EdgeCaster in the Cloud Control, first navigate to the Advanced tab in the web UI and click on the LiveEdge® Cloud button which says, “Enroll in LiveEdge® Cloud”
This will prompt the user to confirm enrolling the Node/EdgeCaster in the Cloud Control. It can also be disabled here in the future if needed. The button will show text indicating that it is “provisioning” the device.
Button as it shows while the Node/EdgeCaster is provisioning itself for Cloud Control
Once the Node/EdgeCaster is provisioned the following options will show "Disable LiveEdge® Cloud Communication" or "Adopt Device into Organization". Click on "Adopt Device into Organization" to get started in Cloud Control.
Next, click yes to adopt your Node/EdgeCaster into your Organization’s Cloud Control. It will prompt you to confirm the serial number of the device that you are enrolling in Cloud Control.
Reboot your Node/EdgeCaster and it is now enrolled and ready to be used in Cloud Control! This can be done either from the cloud or from local access on the unit under the advanced tab.
For more information on using Cloud Control, please visit this article.