Pre-requisites
- EdgeCasters must be on a minimum version of 9.0.x
- The customer has admin access to their LiveEdge Cloud organization, as set up by a Videon team member
Now with the LiveEdge Core 9.0 software release, all it takes is one-click to get EdgeCaster enrolled in the Videon LiveEdge Cloud.
To enroll an EdgeCaster in the LiveEdge Cloud first navigate to the advanced tab in the web ui and click on the LiveEdge Cloud button which says “Enroll in LiveEdge Cloud”
This will prompt the user to confirm enrolling the EdgeCaster in the LiveEdge Cloud. It can also be disabled here in the future if needed. The button will show text indicating that it is “provisioning” the device.
Button as it shows while the EdgeCaster is provisioning itself for LiveEdgeCloud
Once the EdgeCaster is provisioned the following options will show "Disable LiveEdge Cloud Communication" or "Adopt Device into Organization". Click on "Adopt Device into Organization" to get started in LiveEdge Cloud.
Next, click yes to adopt your EdgeCaster into your Organization’s LiveEdge Cloud. It will prompt you to confirm the serial number of the device that you are enrolling in LiveEdgeCloud.
Reboot your EdgeCaster and it is now enrolled and ready to be used in LiveEdge Cloud! This can be done either from the cloud or from local access on the unit under the advanced tab.