If you have a Videon device that supports HDMI output, you can set the device up not only as a decoder, but also as a confidence monitor to the encoded stream that you are sending out to wherever you want. All this takes is a few easy steps:
- Connect to the device you would like to set up as a confidence monitor (can be the same device that you are streaming from)
- Navigate to Decoder Control in the Streaming Dashboard
- Click Configure under Stream Settings
- Choose the name of the device you are streaming from for Source Encoder
- Select Unicast as Stream Type
- Choose rtp or udp for Protocol based on Unicast streaming tips
- Enter a port between 1000-65000. This can be any number in that range
Once you click Save, your confidence monitor should be set up and outputting via the HDMI Out port. Makes sure to set a decoder resolution that is supported by the display the confidence monitor is being sent to.