Thank you for choosing LiveEdge® 2Go - Max. In this article, we will discuss the expected boot-up time for the LiveEdge® 2Go - Max device.
Boot-up times:
When powering up your LiveEdge® 2Go device, you can expect the following behavior:
-
USB Display Initialization: Upon power-up, it takes approximately 45 seconds for the USB Display on the 2Go plate to show text. During this time, the device is initializing its internal components and preparing for operation.
-
IP Address Display: After the USB Display shows text, it takes about 1 minute and 25 seconds for the IP Address to be displayed on the USB Display. This step indicates that the LiveEdge® Max has successfully obtained an IP Address and is ready for network communication.
-
Web UI Accessibility: Once the IP Address is displayed, it takes a total of 3 minutes for the LiveEdge® Max to be fully accessible via the Web UI. This includes the time it takes to input the device's IP address into your browser and navigate to the Web UI interface.
Note: The boot-up times mentioned above are approximate and may vary based on factors such as network configuration and device settings.
If you have any further questions or concerns, please don’t hesitate to reach out to our support team at techsupport@videonlabs.com. Our engineers are here to support you every step of the way.