Using SRT Listener for local confidence monitoring

SRT

Setting up the Videon device as an encoder

1. Connect to the Videon device
2. Navigate to Encoder Control in the Streaming Dashboard
3. Click one of the SRT outputs under Outputs
4. Select the desired valid Video and Audio Source
5. Under either SRT Output 1, 2, or 3
   1. Select Call Mode: Listener
   2. Enter the port to stream on into the Port field
6. Click the On/Off switch next to SRT Output 1, 2, or 3 to ON
7. Click Save

A common decoder used in testing is VLC Media Player. Once installed on your computer, simply navigate to "Media > Open Network Stream..." and enter srt://internal_encoder_ip:port (i.e. srt://10.0.0.100:1234) , click Play, and you should see your stream!