THIS FEATURE MAY HAVE UNEXPECTED RESULTS IN V10.0.0.146.3 & V10.0.1.148.3. PLEASE USE STANDARD XML CONTROL UNTIL THIS ISSUE HAS BEEN RESOLVED.
The LiveEdge Node/EdgeCaster supports the ability to insert an SD card containing an XML file which will then configure the device according to the appropriate configurations as defined by the XML file. Please use the following instructions to configure a device via XML using an SD card.
Instructions:
- Refer to the Example XML file from this article to construct the appropriate XML configuration file.
- Use an XML file validator such as https://www.xmlvalidation.com/ to ensure there are no obvious syntax errors.
- Rename the XML configuration file config.xml
- Copy the file onto an SD card formatted to FAT32 filesystem
- Insert the SD card into your LiveEdge Node/EdgeCaster
- Observe that the configurations from the XML file are now applied to your device!