Warning: This article applies to Videon devices running the Supervisor Web UI introduced in V13.0.0. If your device shows the earlier Web UI without the Supervisor sidebar, use What if I forget my security password to my encoder? (earlier Web UI).
Table of Contents
- Problem
- Solution
- Option 1: Have another administrator reset the password
- Option 2: Use a browser that is still signed in
- Option 3: Factory reset the device
- After the factory reset
- Avoid being locked out again
- Related articles
Problem
Password protection (Require authentication) is turned on, and the password for the admin account has been forgotten or lost. The Supervisor sign-in page has no Forgot password link and no recovery code, and Supervisor never displays or emails a password, so the password cannot be recovered from the sign-in page itself.
Screenshot 1: The Supervisor sign-in page offers no password recovery option.
Note: What changed. In earlier software the password lived in the Encoder UI under Device Settings > Security, and a factory reset was the only way back in. In Supervisor, authentication is a platform setting at Platform > Settings > Supervisor, accounts are listed on the Users tab, and there are several things to try before resetting the device.
Solution
Work through the options below in order. Options 1 to 3 keep the device configuration intact. Option 4 (factory reset) is the last resort because it erases the configuration along with the password.
Option 1: Have another administrator reset the password
On devices that carry the user-management entitlement, Supervisor supports multiple accounts. Any account with the admin role can reset the password of another account:
- Sign in to the Web UI with a working admin account.
- In the sidebar, expand Platform and select Settings, then open the Users tab.
- Select the locked-out account and choose Reset password.
- Enter a new password of at least eight characters. Turn on Require change on next login if the user should choose their own password, then save.
Without the entitlement, the Users tab is a read-only list and the device has a single admin account, so this option is not available.
Screenshot 2: Users tab under Platform > Settings. On this non-entitled test device only the built-in admin account exists and no row actions are offered.
Option 2: Use a browser that is still signed in
A Supervisor session stays valid in the browser until it expires or someone selects Logout. Check every computer that has been used to manage the device, including remote-desktop sessions. If any browser is still signed in as admin:
- Entitled device: reset the password from the Users tab as described in Option 1.
- Any device: go to Platform > Settings > Supervisor, turn off Require authentication in the Access section, and select Save. The Web UI then opens without a sign-in page. When you are ready, turn Require authentication back on and set a new password by following Setting up password protection.
Warning: Do not select Logout or clear the browser data until the password has been reset or authentication has been turned off. Once that session ends there is no way back in without a factory reset.
Screenshot 3: Access section of the Supervisor tab. A signed-in administrator can turn Require authentication off without entering the current password.
Option 3: Factory reset the device
If nobody can sign in, the only remaining way to regain access is a factory reset. A factory reset erases the stored credentials along with the rest of the device configuration, and the Web UI opens without a sign-in page after the device reboots.
Warning: A factory reset cannot be undone. On a Supervisor device it erases:
- User accounts and passwords
- Supervisor settings, including authentication, HTTPS, web ports, and network discovery
- Application overrides and non-application containers and images
- Entitlements (they must be refreshed from LiveEdge Cloud afterwards)
- Network configuration (the device returns to DHCP)
- Recordings on internal storage, and all inputs, encoders, and outputs
Before you reset, collect whatever you can about the current configuration: output URLs and stream keys, encoder settings, static IP details, and the device name. LiveEdge Cloud Control shows most of this even when the local Web UI is locked.
Because you cannot sign in, use the hardware procedure for your model:
- LiveEdge Max, Max 2, EZ Max, EZ Max 2: use the front-panel display to choose Reset: Factory Reset. See LiveEdge Max Factory Reset.
- LiveEdge Node and EdgeCaster: hold the front button while applying power until the LEDs blink. See LiveEdge Node/EdgeCaster Factory Reset.
Note: Reset settings is not enough. The Reset settings action on the same tab returns only the streaming settings to defaults and keeps the device name, network settings, and credentials. Only Factory reset clears the password.
Supervisor also has its own Factory reset action at Platform > Settings > Device (Reset section). It does the same thing as the hardware procedure, but it requires a signed-in session, so it is only useful together with Option 2. The confirmation dialog, Factory reset device?, asks you to type CONFIRM before the reset starts.
Screenshot 4: Reset section of the Device tab. The Factory reset description confirms that credentials are wiped; Reset settings does not touch them.
After the factory reset
- Wait for the device to finish booting. It comes back on DHCP, so find its new IP address from the front-panel display (Max), from LiveEdge Cloud Control, from network discovery, or from your router's DHCP table, then open http://<device-ip>:8080 in a supported browser.
- The Web UI opens without a sign-in page because Require authentication is off after a reset.
- If the device used a static IP or a specific network configuration, restore it before continuing.
- Turn password protection back on at Platform > Settings > Supervisor > Require authentication and select Save. Sign in with the default administrator credentials; Supervisor requires a new password on first login. Follow Setting up password protection for the full procedure.
- Restore entitlements at Platform > Settings > Entitlements with Refresh (fetches the signed entitlement document from LiveEdge Cloud) or Upload (installs a signed JSON file).
- Check Platform > Settings > LiveEdge Cloud. If the device shows as not enrolled, enroll it again so that Cloud Control can manage it.
- Rebuild the streaming configuration (inputs, encoders, outputs) from your notes, or push it from LiveEdge Cloud Control.
Screenshot 5: Entitlements tab. Refresh reinstalls entitlements that a factory reset removed.
Avoid being locked out again
- Record the password together with the device name, serial number, and IP address in a password manager, not on a sticky note on the device.
- On entitled devices, create a second account with the admin role so that one administrator can always reset the other.
- Keep the device enrolled in LiveEdge Cloud so that configuration is visible and the password can be managed remotely.
- Screenshot or export the configuration before turning authentication on, so that a reset costs time rather than information.